Magpie -$2799.00
The specifications for this Magpie are as follows:
-Bookmatched spalted willow top and back
-Chambered maple body core
-Maple neck, quartersawn w/ large C-shape neck carve (0.92″ – 0.98″)
-Pistachio fretboard ( r = 12″)
-21 jumbo nickel-silver frets
-25.5″ scale length
-Cardinal CI90 p/ups (7.0K = neck and 7.4K = bridge)
-Tone Pros wrap-around bridge, nickel plated aluminum
-Volume tone and 3-way toggle (CTS pots, Switchcraft switch, Mallory 150 tone cap)
-Pearl side dots and double dots at 12th fret
-Matching p/up covers and control cavity plate
-Sperzel Sound Lok tuners, nickel
-Vintage bone nut
-$2799.00 with hardshell case included
Magpie – Spalted Sycamore
Available for customization. Myriad p/up choices are available, as well as dimensional specifications.
-Spalted sycamore body, harvested from a naturally felled tree and air dried
-Maple neck
-Ebony fretboard (r=12″) with late 19th-century style/early 20th-century style pearl inlays
-Cast bronze tailpiece
Contact me for further details
ZENITH (Custom)-$2700.00
Specifications for Zenith #Z1163 are as follows:
-Pomelle sapele top, bookmatched, quilted
-Honduran mahogany back, chambered, 1-piece
-Pau ferro neck, quartersawn, medium C-shape carve
-Pau ferro fretboard, quartersawn, radius = 12″
-Maple accent stripe on body edge
-Varnish and Danish oil finish on body
-Behlen oil finish on neck and fretboard
-21 jumbo frets
-25.5″ scale length
-Cardinal humbucker (7.2K) and Cardinal T-neck (5.6K)
-Sperzel Sound Lok tuners
-Chrome hardware
-Vintage bone nut
-Pearl side dots with double pearl dot 12th fret position marker
-CTS potentiometers, Switchcraft switch and jack
Magpie-Copper Top $2600.00 (SOLD)
Specifications for Magpie #M1165 are as follows:
Cypress body, 1-piece
Padauk neck, large C-shape neck carve
Cocobolo fretboard, radius =12″
Distressed and patinaed copper veneer on body
21 jumbo frets
25.5″ scale length
Floating TOM saddle on rosewood bridge
Trapeze tailpiece
Lollar/Supro lapsteel pickup
Volume and tone controls, CTS pots
Pearl side dots with pearl double dot 12th fret position marker
Inset bronze neck plate with patina
Chrome hardware
Sperzel Sound Lok tuners
Vintage bone nut
Guitar ships with hardcase and 1-year warranty.
Zenith (aka “Uber-Zenith) $3079.00 (SOLD)
This custom Zenith will be available at Mountain Cat Guitars (www.mountaincatguitars.com) the week of 5/16/2011. Specs are as follows:
-Claro walnut top includes some chatoyance and spalt (1-piece and very old air dried)
-Black walnut back
-Black maple accent stripe divides the top and back
-Quartersawn limba neck
-Olivewood fretboard
-Danish oil and varnish on body and neck
-Black side dots and double dots @ 12th fret
-Ebony headstock veneer with “C” inlay in pearl
-Radius is 12″
-C-shape neck carve (0.90″ @1st fret/0.98″@12th fret)
-21 jumbo frets
-Sperzel Sound Lok tuners
-Custom wound Cardinal Tele set (7.2K bridge/7.1K neck)
-Bridge is stainless steel with brass compensated saddles from Armadillo
-Knobs and switch tip are stainless steel and proprietary to Cardinal -Volume, tone and 3-way toggle
-CTS pots and Switchcraft jack and 3-way toggle
-Mother-of-pearl nut with copper laminate (1-11/16″ = width)
-Mallory 150 tone cap
-All cavities are shielded
-Weight is approximately 7.0lbs
-1-year warranty, hardshell case included in price, free FedEx Ground shipping in the lower 48
-48-hour approval period
West (SOLD)
Available soon, with many specs ready for your customization. Details include:
-Mesquite body, chambered, top and back from same billet
-Purpleheart accent stripe
-Maple neck, quarter-sawn and flamed
-Pao ferro fretboard (r = 12″)
-21 frets
-Final weight will be within a few ounces of 7lbs
-Price TBD as details become finalized
Neck shape and thickness, pickup(s), fret size, hardware and control layout are specs are ready for your approval. Let us know if you’re interested. We can have this guitar completed quickly. More pics available as its completion moves forward.
SOLD
East-vibrato #2
This is the second vibrato equipped East. It is available. Specs include:
-Spalted pecan body
-Pecan neck, quarter-sawn
-Mesquite fretboard (r = 12″)
-21-jumbo frets
-Cardinal Original or H/O p/ups
-Wilkinson vibrato in chrome or black
-Volume, Tone and 3-way toggle (CTS and Switchcraft)
-Side makers and 12th position double dots
-Vintage bone nut
-Sperzel Sound Loc tuners (black or chrome)
-Weight approx. = 7.5lbs
-Varnish/Danish oil finish
-$2299.00 with hardcase and free ground shipping via FedEx in the lower 48
More pics available upon request.
Magpie – $2249.00
-Solid sInker cypress body
-Maple neck, quartersawn, large C-shape neck carve
-Bocote fretboard (r=12″)
-21 jumbo frets
-Volume and tone controls (CTS pots)
-Switchcraft 3-way toggle switch
-Chrome control knobs, strap buttons and ferrules
-Tru-oil finish
-Tune-o-matic bridge
-Sperzel Sound Lok tuners (chrome)
-Bone nut (1-11/16″)
-Lollar 50s wind P-90, custom Cardinal original neck p/up
-6.6lbs.
-Available now @$2249.00 with hardshell case
Wormy MAGPIE $3299.00 (SOLD)
One-of-a-kind is an understatement. Its tones are wicked and familiar. Specs are as follows:
-Wormy sinker cypress body, 1-piece
-Bocote neck, quarter sawn, large C-shape neck carve
-Bocote fretboard, quartersawn, (r =12″)
-21 EVO jumbo frets
-Tone pros wrap-around bridge
-Sperzel Sound Loc tuners
-Chrome control knobs, strap buttons and jack plate
-CTS pots and Switchcraft 3-way toggle
-7.6lbs
-Bone nut 91-11/16″)
-Lollar P-90, Cardinal custom H/O single coil
-Sinker cypress control cavity cover
-Tru-oil finish on body and neck
-Hardshell case and free ground shipping in the lower 48
-48-hour approval period, 1-year warranty
Words fail on this one. Call us or email us for more details…..if I can find the words!!
SOLD
ZENITH – Texas Ebony and Ziricote $2899.00
This one was certainly one of the stars of the Montreal Guitar Show. Specs are as follows:
-Texas ebony top, bookmatched and air dried
-Chambered walnut back
-Purpleheart accent stripe between top and back
-Ziricote neck, C-shape neck carve (0.88″ – 0.95″)
-Ziricote fretboard with sapwood (r = 12″)
-Ebony headstock veneer w/ pearl Cardinal Compass Logo
-Texas ebony control cavity cover plate
-21 jumbo frets
-Cardinal humbucker and single coil custom wound specifically for this guitar
-Volume, Tone and 3-way toggle
-Armadillo Machine Works bridge, knobs, p/up rings and switch tip
-Sperzel locking tuners in black
-Black string ferrules, strap buttons and jack plate
-Mallory 150 tone capacitor (0.047 puf)
-7.4lbs
-Danish oil finish on body, Tru-oil varnish on neck
-Bone nut (1-11/16″)
-Hardshell case, and fre ground shipping in the lower 48
-$2899.00 with a 48 hour approval period and 1-year warranty
Balanced with a nice lower mid push. Lots of detail and no clutter on close intervals.
WEST w/ Custom Features $2699.00
Specifications include:
-Reclaimed antique yellow pine top and back
-Texas walnut chambered core
-Texas walnut neck w/large C-carve
-Osage orange fretboard ( r = 10″)
-21 jumbo frets
-Pearl side dots and dual position markers at the 12th fret
-Cardinal varnish thinly applied to maintain the the ever so slightly aged appearance of the pine
-Volume, tone and 3-way toggle (CTS pots)
-Seymour Duncan Antiquity Firebird p/up in the bridge postion
-Custom nesparo p/up ring
-Cardinal singlecoil p/up w/increased output in the neck position
-White-tailed deer bone nut (1-11/16″ width)
-Hipshot hardtail bridge
-Sperzel Sound Loc tuners
-Copper shielded control and p/up cavities
-Linseed oil and Tru-oil finish on neck
-48 approval period
-Free ground shipping in the lower 48.
-$2699.00 w/ case and 1-year warranty
Authentic Firebird tones in the bridge with a bit more high-end content thanks to the pine. Ringing, clear and with a nice thump in the lows. Morphs well between clean and scream. Neck p/up has a wide clear tone that warms up nicely with a harder pick attack.
SOUTH Prototype #1 -$1499.00
It’s got one more trip to make and then it’s yours! This is absolutely killer.
-Cypress solid body
-Maple / bubinga neck
-34″ scale
-Gotoh hardware.
-Custom Cardinal single coils. wound specifically for this bass
- 7lbs!!!!!
Get a little piece of history! Free shipping in the lower 48. Delivers with a 48 hour approval period.
Cardinal SOUTH Bass Prototype #2 FOR SALE
We’ve made all the changes we need for the production version of our 4-string bass. Now it’s time to let the the second SOUTH prototype do its wonderful work in the hands of some lucky player. There are few cosmetic nicks and a little hazing, but NOTHING of consequence.
Specs include:
-Burled redwood top w/ matching control cavity cover
-Chambered mahogany back w/ maple accent stripe.
-5-piece laminate neck constructed of mesquite, maple and bubinga
-2 Cardinal bass p/ups w/ permanently attached ebony covers
-Thin, hand rubbed varnish on body and neck
-Volume, Tone and 3-way toggle (there is room in the control cavity for preamp mods)
-Gotoh hardware
-34″ scale length
-Pearl side dots
-Case included with free ground shipping int he lower 48.
-48 hour approval period
-List price is $3300.00 SALE PRICE $2399.00
Custom WEST Bound for Montreal Guitar Show. SOLD
WEST w/custom options:
-Highly burled mesquite top
-TX walnut back (there’s a bit of quilting in the figure)
-Cocobolo neck, medium,slightly flat C-carve
-Highly figured cocobolo fretboard w/12″ radius
-21 jumbo frets
-Sperzel Sound Loc tuners w/graduated string post heights
-Hipshot bridge
-Cardinal single coil p/ups voiced specifically for this instrument (More midrange bark)
-Ebony pickup covers
-Cardinal varnish on body
-No finish on neck or fretboard
-Matching, inset cocobolo control cavity cover
-Pearl side makers and 12th fret position markers
-Gator case included
-48 hour approval period, free ground shipping in the lower 48.
-Price SOLD
DEMO SALE – Check it out.
WEST Proto #1 – Serial #’d and documented as a proto. Big neck, semi hollow $1399.00 SOLD
EAST Copper Top #1 – $1499.00
EAST Mesquite – $1099.00 SOLD
All of these guitars are in perfect playing condition. They do have slight dings, small scratches and a bit of finish hazing. All frets have fresh crowns, and they play perfectly. Beautiful tones abound from all. Prices are “as is” with a 48 a hour approval period, and we’ll honor a full 1-year warranty. Gig bag included and free CONUS ground shipping.
ZENITH #1 $2199.00 (SOLD)
EDIT: We will gladly add a neck pickup, tone control and 3-way switch, if desired.
We went all out with our first production ZENITH. This new Cardinal platform will feature elements that are both traditional and Cardinal. Note the T-style bridge and custom wound Cardinal p/up. The bridge will accept other Cardinal p/up winds, as well as myriad after market opportunities. Features include:
- 2-piece HIGHLY figured mesquite top
- 1-piece semi-hollow TX ash back
- Maple neck, baseball bat C-carve
- Mesquite fretboard w/ 10″ radius
- 21 jumbo frets
- 25.5″ scale length
- T-style bridge w/compensated saddles
- Custom Cardinal p/up
- Sperzel Sound Loc tuners w/graduated string posts
- White-tailed deer bone nut
- Cardinal gloss varnish on body
- Tru-oil on neck and fretboard
- $2199.00 w/case and free ground shipping in the lower 48
- As usual, ZENITH #1 comes with a 48 hour approval period
- Clips available on our blog. We can email them to you if needed
WEST Figured Texas Walnut on Mesquite $1499.00
This spectacular WEST is ready for your guitar playing bliss. Features include:
- 2-piece figured TX walnut top
- 2-piece mesquite back
- TX walnut neck, medium C-carve, 1-11/16″ nut width
- TX ebony f/b, 12″ radius
- 21 jumbo frets
- 2 Cardinal single coils custom wound for the instrument, OOP in the middle position
- Volume, Tone, 3-way toggle
- Danish oil on body, varnish on neck
- Locking Sperzel Tuners
- Hipshot bridge
- 7.2lbs
-$2399.00 with a 48 hour approval period. Email us for more details
-Gig bag and ground shipping in the lower 48 included in price.
This a fantastic instrument. The neck p/up is wound warm and clear at around 6.5K ohms. The bridge p/up is hotter and fuller in the upper mids. A great mix of mellow to rock tones. Playability is second to none. You can’t go wrong with this one.
WEST Bois d’Arc top on Mesquite $2399.00
It is a spectacular guitar. There’s no other way to describe her. We built two like this side-by-side, and this on is ready for your plucky fingers. Specs include:
- Semi hollow WEST construction
- 1-piece bois d’arc top
- 2-piece clear mesquite back
- Mesquite neck with a chunky C-carve
- Bois d’arc fret board with a 12″ radius
- 2 Cardinal single coil pickups. Both have Alnico V magnets and are 9K+ K ohms
- Custom Cardinal varnish
- Hipshot bridge
- Sperzel Sound-Loc tuners. Gotohs are optional on this guitar.
- Volume, Tone and 3-way toggle controls.
- 21 jumbo frets
- 25.5″ scale.
- 2 pearl dots at the 12th fret
- Pearl side markers
- Padded gig bag included
- 48 hour approval period. Contact us for details
- Free ground shipping in the lower 48.
This WEST is stunning in person, and plays and sounds even better. A truly unique and uncompromising
guitar.